I was feeling just a little bit desperate to try weaving. I wanted a loom! And I didn't want to wait. But then reason set in. Why would I need to spend a bunch of money to try weaving? Couldn't it be done in a simple way? Without a lot of fuss? When I posted a question on Ravelry, a kind weaver suggested I try backstrap weaving, so I checked out the book "Backstrap Weaving," by Barbara Taber and Marilyn Anderson. A few hours after I opened the first page of this 1975 classic, I had assembled everything I needed to weave: some dowels, twine, yarn, and a ruler. I was ready! And I was hooked!
The first picture on the left is of the warp. I decided to start by making the first project in the book, a backstrap, but I chose the worst kind of yarn possible--100%, scratchy, sticky wool. I bought it second-hand for $1 and the label said Icelandic wool. It looks nice in the pictures, doesn't it? I flipped over a footstool and did the figure eight warp which I then transferred to the dowels. Everything was going smoothly--I even attached the string heddle, which pulls up one set of the warp thread to create the shed, or the space between the bottom and top warp.
See that big hunk of wood in the third picture? That was my sad attempt to find a beater, or the piece of wood that beats the weft in place. It didn't work because it was too blocky, so I swapped to a ruler, which makes a fine beater.
I felt creative that day so I braided some hemp twine and made the strings that tie the entire backstrap loom into place--or in my case, onto the radiator. After struggling a little bit with the loom flipping over a few times, I braided another "holder." This time two separate braids that hold the sides independently. (It works great, but I still use the first one at times.)
At this point, I realized that using wool was best left to experts. Because the warp is wound rather tightly, each thread rubs against the one next to it, causing little snags. I think mine started felting! So, I reluctantly took the entire project apart before weaving one row and searched for some cotton. I found this crazy green and orange, sport-weight, mercerized cotton at Hobby Lobby. It's Sinfonia Melon. This time around, it was easier to wind the warp to get started, and I wound 50 ends. Since I had actually done a string heddle before, the second time was a breeze, especially since I used a long piece of mercerized cotton. And then came time to try to weave. I was stumped again. It just didn't seem to "work" when I tried to open the sheds. The nearest one, with the string heddle, was easy. It was the back one that confused me. How do you get the bottom strands to come up to the top? Finally, I turned to the Internet and discovered the all-time best article on backstrap weaving EVER! It's called "Backstrap Basics" by Laverne Waddington, published in the September 16, 2009 edition of the online magazine Weavezine. Here's the link: http://www.weavezine.com/content/backstrap-basics.
Not only does Laverne clearly outline how to assemble and use a backstrap loom, she includes videos! When I saw how someone weaves on a little loom like mine, I knew I could do it on my own.
With my new yarn, everything was easier. It's the only advice I can pass along at this early state: use a nice, slick yarn if you can! The weft can be thicker and woolier, but I chose to stick with cotton, again Sinfonia sport weight, this time the color is Olive. After several hours of studying, thinking, attempting, and tearing apart and putting back together, it "only" took me three hours to weave the backstrap, and then another thirty minutes to braid the ends. If you look at my edges, you'll see what is the most difficult part--keeping the selvedges even, but I noticed a lot of improvement as my project neared its end. I've already started my second project which I'll post about soon.
As for the "What is this?" post from last week--I'll share with you my very basic rigid heddle later on when I use it with the backstrap loom.
What is this thing? Is it homemade? (Obviously -- needs sanding, don't you think?) What will it be used for? Will it work when it's used for what it's supposed to be used for? (I can only hope!) And who drilled those terribly crooked holes? (Ummm... that would be me.)
Tune in later this week for all the details. Wow! The excitement!
I'm nearly finished with my first project using my 10" Authentic Knitting Board. (Yes, I bought the 10" as well as the 28".) I'm using Berroco Vintage Yarn, which is a wool/acrylic blend, and a simple ribbed wrapping. The one little complaint I have about the yarn is that it snags quite a bit. I keep having small strands stuck on the knitting board pegs and then I have to carefully figure out where they belong and do that peg over. Other than that, it's a very soft, slightly worn-out yarn that is really warm and cozy. I'll post pictures of it later, as it is a Christmas present.
I've spent the past two weeks thinking about rigid heddle looms after visiting Susan Johnson's Alavanche Looms workshop way out in the backwoods of Wisconsin. It's worth the drive. Not only is she an extremely talented weaver, the store is beautiful and chock full of cool goodies. Susan chatted with me about weaving and got me wondering if I should give a loom a try. But then that led to another week of thoughts about somehow obtaining a rectangle loom to do continuous weave scarves and shawls... And then that led to yet another fascination: Peg Looms.
I've never heard of peg loom or stick weaving until I happened across a Ravelry discussion, but it appears to be a very old form of weaving, mainly used for making rugs. Although there are some peg loom sellers in the UK, I haven't spotted a US seller as of yet. However, there are instructions out there, so perhaps, with a little bit of patience, I could piece one together.
Here are some peg loom links: How to make a peg loom; How to use a peg loom; Examples of peg loom weaving.
